Operation method of vacuum packaging machine

发布时间: 2022-06-29

The operation of the vacuum packaging machine is mainly divided into the adjustment before use and the precautions during the use. The details are as follows. use before preparation

1. Place the vacuum packaging machine smoothly to see if the cover is smooth and whether it jumps actively after being released.

2. Equipped with power supply to meet the requirements of the type.

3. Check whether the oil level of the vacuum pump of the vacuum packaging machine is in the correct position, if not, please adjust it (for details, please refer to the operation instructions of the vacuum pump).

4. Grind the machine well. The vacuum sealing machine is to put the food into the packaging bag, extract the air in the packaging bag, and complete the sealing process after reaching the predetermined vacuum degree. It can have the following functions: 1. Pumping and sealing the bag; 2. Directly sealing the mouth of the bag.

5. Turn on the power, turn on the power switch, and close the lid to see if the vacuum pump is working properly.


1 Before use, select the degree of vacuum

The pumping time of the vacuum packaging machine is digitally displayed and continuously adjustable. The pumping time of this small vacuum packaging machine is adjustable by digital rotation 0≤30 seconds. Adjust the length of the pumping time to achieve the desired vacuum level.

2. Select the heating temperature

Select the required heating temperature according to the packaging material, and the heating temperature knob will be adjusted to the corresponding position.

3. Adjust the heating time

Heating time, digital display, continuously adjustable, according to the packaging material and heating temperature, adjust the heating time knob to select the appropriate heating time.

4. Select the silicone characters of the silicone rubber sealing strip according to the needs, and set the characters such as the sealing date.


1. Turn on the power switch.

2. Open the packing bag and put the packing bag into the working room. The sealing strip needs to be placed flat on the silicone rubber belt, the bags do not overlap, and the packing bag packing is turned over and pressed into the mouth of the packing bag.

3. Press the studio (or press the edge of the upper cover) and close the cover, the machine will automatically complete the vacuum packaging process, and automatically open the cover according to the program. Some devices are also equipped with emergency parking switches.

4. Open the vacuum cover and take out the bag to complete a working cycle.

5. When you stop working, turn off the power switch and unplug it. The small vacuum packaging machine has the functions of vacuuming, heat sealing and cooling at one time. It is suitable for vacuum sealing and packaging of food, aquatic products, chemical raw materials, electronic components, fine parts and other products. It can prevent product oxidation, mildew, etc. Anti-corrosion, moisture-proof, can keep quality fresh and extend the product storage period of the machine.

The above is an introduction to the operation of the vacuum packaging machine. The picture below shows a popular vacuum packaging machine

Customers can see our products very clearly, whether it is the whole machine. Perhaps from different details, it is very wonderful, which is one of the reasons why many customers choose our equipment. If you are interested and know how much this vacuum machine costs, you can call our technicians directly!

Related news